Új Toyota HiAce Ambulance mentő

Toyota Hiace Ambulance

Toyota Hiace Ambulance has the proper equipment in order to intervene in emergency situations and carry patients. There is left, right, and ceiling covering in the Hiace ambulance cabinet part. Cabinet internal equipment is designed as being proper to En1789 norms. Hiace ambulance can be manufactured as not only diesel but also gasoline. There is hot and cold air-conditioning in the ambulance in order to use it in hot and damp regions. Hiace ambulance covering consists of one piece of abs material.

-Toyota Hiace Ambulance Electrical System
There is an inverter device in order to procure 220v electricity. The whole electrical system used in the ambulance is agreeable with ISO 67221 standards. The installation used in the ambulance has different shapes and colors with the vehicle’s own installation. The cable connectors and the sockets used in the ambulance are manufactured as compatible with EN ISO 8092-1, EN ISO 8092-3, EN ISO 8092-4 norms. There is a 180 ah additional replacement battery that provides electricity to medical devices in the ambulance. Also, there is a rectifier device, located under the passenger seat in the driver’s compartment, that can be charged with the ambulance’s replacement battery. In order to support the vehicle’s replacement battery, the ambulance’s batteries can be charged with 220v input socket, based out of the ambulance, in case the vehicle’s engine is not in motion. This type of use allows the utilization of medical devices in the vehicle even the ambulance is not in motion.

Toyota Hiace Ambulance Electric Panel
The whole installation in the ambulance is connected to an insurance box which is located in the patient’s cabinet. There is a system in this box in order to take precautions against leakage current and control the current circuit. Also, there is a master key that enables to open and close the entire electrical system safely in Toyota Hiace ambulance. This key is located on the left side of the steering wheel in the driver’s compartment. It closes itself without no need any intervention coming from outside in 30 minutes when the ambulance is stopped. There is a touch panel system which enables to control the entire electric system, such as lamps, air-conditioning, and the heater, of the ambulance in the cabinet. Also, there is a cooling fan that moves in automatically in order to prevent overheating.

-Ambulance Cupboard System
The whole cupboard system is manufactured from 3mm thick foamboard material whose external surface is covered with PVC covering. The patient compartment’s external surfaces can be formed as orange or white. Foamboard material used for covering the ambulance’s cupboard has 17mm thickness. The cabinet shelves are produced using foamboard material which has 10mm thickness. Toyota Hiace ambulance cupboards and their coverings are fireproof and compatible with 95/28/EC norms. There is a long cupboard with shelves that installed with a defibrillator, ventilator, vacuum aspirator used in the ambulance in the left side of the patient cabinet. Each device has its own independent electric socket. Also, there is an explicit oxygen outlet socket for the ventilator device.

-Ambulance Front Cabinet System
There is a cabinet system in order to facilitate placing the medical bag, using in the vehicle, first aid kits, and the medicines in front of the patient cabinet partition. This system is located totally counter in case looking the vehicle from the rear of the ambulance. These cabinets are manufactured as one piece. Their height is 140 cm, depth is 40 cm, and the width is 25 cm. These measures can be changed if the user requests. The entire cabinets in the ambulance have a special rail system. It is used a safe lock system in the ambulance while the vehicle is in motion.

-Toyota Hiace Ambulance Drawers
The drawers have a special lock system. They are not opened while the ambulance is in motion. in fact, they have a special security system in order to prevent drawers to make noise and vibration. There is a workbench with plastic alloy on the cupboards in order to enable the attendant to prepare easily the materials such as injection, medicine, and serum. This workbench is openable and closeable, manufactured as one piece, antibacterial, and can be cleaned easily.

-Toyota Hiace Ambulance Cabin Lighting
There are two lamps, having a stimulant system and warning voices, with a led system on the ceiling. It is used with a hand control located in the driver’s compartment. There is a rear projector system in the headlamp as buried on the backside of the vehicle. The ambulance rear led lamp works automatically via a switch when the back door is opened. There are four armature lamps with led and two spot lamps. Spot lamps can be used in case of insufficiency of armature lamps. These lamps are located in the vehicles’ internal ceiling and can be controlled simply with the ambulance’s digital control panel.

-The Lighting Of The Ambulances’ Rear Area
There is a rear led lighting system on the condition that there is inadequate light in order to supply the patient’s input to the Toyota Hiace ambulance. This system starts to work in case the back door stays open for more than 10 seconds.

-Ambulance Digital Electric Panel
Energy moves to 12v sockets providing the ambulances’ master key are opened. On the other hand, the energy goes to 220v sockets supposing both the master key and ambulance inverter are opened. These sockets are designed to enable the use of medical devices easily in the ambulance. It allows us to average 200w medical devices to work.

-Heating Of The Patient Cabin
There is a heater that works with diesel or aqueous system located under the medical device cabinet. Heater with diesel fuel works independently from the vehicle’s engine. There is no need to work the ambulance’s engine in order to heat the patient cabin. The heater has its own thermostat and it moves in automatically when the warmth decreases.

-External Lighting
There are six lateral lamps that spread the blue color based out of the ambulance. Lateral lamps work in sync with the headlamps and controlled with a hand control located in the drivers’ compartment.

-Ambulance Inverter System
Toyota Hiace ambulance turns 12 direct current’s 220v, taken from the vehicle’s battery, to alternative energy. Later, it sends that energy to 4 sockets which are situated in the ambulance cabin.

-Ambulance Rectifier System
It enables external to turn 220v energy to 12 v cd in order to charge the battery fully in case the ambulance battery weakens and the ambulance cannot be worked for a long while