MASTRAİLER TANKER
MASTRAİLER TANKER
Készleten: 5 hirdetés
4 éve az Autoline-nál
A címet ellenőriztük
A telefonszámokat ellenőriztük
Készleten: 5 hirdetés
4 éve az Autoline-nál
A Új Mas Trailer Tanker 2024 Aluminium medium model tartálykocsi hirdetett termék elkelt, és ezért nem szerepel a keresésben!
Hasonló hirdetések
Eladva
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 2
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 3
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 4
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 5
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 6
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 7
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 8
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 9
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 10
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 11
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 12
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 13
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 14
új Mas Trailer Tanker 2024  Aluminium medium model tartálykocsi kép 15
1/15
Márkanév:  Mas Trailer Tanker
Modell:  2024 Aluminium medium model
Típus:  tartálykocsi
Térfogat:  30 000 l
Teherbíró képesség:  25 500 kg
Saját tömeg:  5 500 kg
Össztömeg:  31 000 kg
Helyszín:  Törökország Karatay / Konyaaz Öntől való 9152 km
Feltöltés dátuma:  több mint egy hónapja
Autoline azonosító:  JG36103

Részletes információk — Új Mas Trailer Tanker 2024 Aluminium medium model tartálykocsi

MEDIUM MODEL
ALUMINIUM TANKER

DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm

CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 5 Compartments
Tank capacity between 30.000 lt & 40.000 lt
5.28mm aluminum alloy sheet


Axles
3 local axles are used, each with a capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the cab.

BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.

ELECTRICAL SYSTEM:
Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear tail lights, side marker lights, brake safety warning lights and signal lights will be installed.
There will be 2 tail and stop combination lights.
2 indicators will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.

PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM

TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)


KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.


PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost.

KURTUBA manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm.


KURTUBA pneumatic control unit
It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows to control the system during filling and emptying of the tank.

KURTUBA Bottom Valve
3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.

KURTUBA API valve:
It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.


ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 folding ladder
Holder for two 3.5 m drain hoses

Note: Please contact us for your production requests in special sizes.
Teljes megjegyzés mutatása
MEDIUM MODEL
ALUMINIUM TANKER

DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm

CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 5 Compartments
Tank capacity between 30.000 lt & 40.000 lt
5.28mm aluminum alloy sheet


Axles
3 local axles are used, each with a capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the cab.

BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.

ELECTRICAL SYSTEM:
Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear tail lights, side marker lights, brake safety warning lights and signal lights will be installed.
There will be 2 tail and stop combination lights.
2 indicators will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.

PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM

TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)


KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.


PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost.

KURTUBA manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm.


KURTUBA pneumatic control unit
It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows to control the system during filling and emptying of the tank.

KURTUBA Bottom Valve
3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.

KURTUBA API valve:
It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed.


ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 folding ladder
Holder for two 3.5 m drain hoses

Note: Please contact us for your production requests in special sizes.